Why This Bell Pendant Earns Its Place on Display
This Bell piece is about a pair of bells hung from a ribbon with a bow at the crown, clappers visible below the rims and highlights catching the curved metal, and it is finished in warm brass and antique gold with rich red ribbon against a deep green ground. Expect traditional and bright, not spectacle. Bell imagery belongs to the older, more traditional end of Christmas decor, and the ribbon is what ties it to the season. It is for makers who want a seasonal project they can finish in a few evenings. Designed for Christmas door and wall decor, it holds up as decor rather than as something you finish and put in a drawer. Reference GH012-3. Bell imagery belongs to the older, more traditional end of Christmas decor, and the ribbon is what ties it to the season Which is the harder half of the job, and it is done here.
bell imagery belongs to the older, more traditional end of Christmas decor, and the ribbon is what ties it to the season. It slots into Christmas door and wall decor because the traditional palette is doing the talking.
DOTZSO makes these pendants for people who would rather hang something made than something bought. What is in the box: the printed pendant blank, DOTZSO resin drills, a sorting tray, a comfort-grip applicator pen, a wax caddy, a hanging ribbon and a pictorial sheet.
The pendant blank is the part that matters. It is rigid enough to hold its shape on a door or a branch without curling at the edges.
The whole face is worked, so no section looks like an afterthought.
Specifications
| Product Type | Crystal Art Hanging Pendant Kit |
| Designed By | DOTZSO |
| Reference | GH012-3 |
| Design | Bell |
| Format | Crystal art hanging pendant |
| Hanging | Ribbon loop included |
| Drill Type | DOTZSO signature resin drills, round |
| Coverage | Full drill |
| Use | Indoor — door, tree or shelf display |
| Canvas Guide | Printed symbols and colour key |
| Colour Palette | warm brass and antique gold with rich red ribbon against a deep green ground |
What’s in the Box
- 1 × printed pendant blank
- 1 × hanging ribbon loop
- DOTZSO signature resin drills, sorted by colour (with extra drills included)
- Diamond painting tray
- Comfort-grip applicator pen
- Wax caddy
- Pictorial step-by-step instructions
How to Make It
- Lay the printed pendant blank flat and let it settle before starting.
- Find the legend strip and match the first symbol to its drill colour.
- Press the pen tip into the wax caddy, then touch it to a drill – the drill lifts and stays on the tip.
- Set the drill onto the matching printed symbol and press lightly. Work one colour block at a time around the blank.
- Continue until the face is covered, then press the finished surface flat with a book to seat every drill.
- Attach the ribbon loop once the surface is sealed, then hang the piece.
Complete it over a few sessions, then hang the piece and leave it up through the season.
Frequently Asked Questions
Is anything in the hanging pendant kit sold separately?
Yes. The Bell hanging pendant kit ships complete with the ribbon loop ready to attach, so the piece can hang as soon as the surface is sealed, plus the DOTZSO resin drills, tray, applicator pen, wax caddy and pictorial instructions. Nothing else needs sourcing. Reference GH012-3.
Does the Bell hanging pendant kit stand up to being used rather than just displayed?
Once the drills are seated and the surface is sealed, the Bell design holds under normal use. It is built for indoor use; a covered porch is fine, and the sealing step is the single biggest factor in how long the finish lasts. The Bell surface tolerates being picked up and moved.
Does the Bell hanging pendant kit need special care?
Dust with a dry, soft brush; keep it out of prolonged direct sun and rain — the adhesive layer under the drills is not built for a soak. For the Bell palette, warm brass and antique gold tones show dust less than pale grounds, so a light pass is usually enough. A microfibre cloth works well on the Bell surface.
Does the Bell artwork rely on printed areas as well as drills?
The face is drilled across the whole blank, so the finished piece has complete coverage without bare board showing. The Bell artwork is drawn so that a pair of bells hung from a ribbon with a bow at the crown reads clearly at any distance. The Bell surface is worked as one continuous piece.
What is the pace like on the Bell hanging pendant kit?
Roughly one to two evenings for most people, depending on the size of the blank. The Bell design is traditional and bright, which tends to make it easier to work in short sessions. The Bell pattern is easy to work in short bursts.
How much practice does the Bell hanging pendant kit need?
Yes. The symbol key is printed directly on the pendant blank and the pictorial instructions walk through the whole process, so no prior diamond painting experience is needed. The Bell layout is traditional and bright, which helps on a first attempt. The kit is complete on delivery.
74 reviews for Christmas Diamond Painting Hanging Pendant Circle Bell Series-A